Table of Contents
Advertisement
Available languages
Available languages
Switching on/off /Selecting a heat setting
■
After you have plugged the appliance into the mains, you can switch it on
with the level switch 6 and select the heat level:
–
"0"
–
"1"
–
"2"
After you have selected a heat level, the respective LED 4/5 starts to flash,
■
indicating that the appliance is heating up.
As soon as the selected temperature is reached, the LED 4/5 lights up
permanently.
Automatic switch-off
This appliance is fitted with an automatic switch-off system. After 30 minutes,
the appliance will switch itself off automatically. After around 25 minutes, the
LED 4/5 that was lit last starts to flash to inform you that the appliance is
about to switch off automatically. If you want to continue using the appliance,
switch it off for a moment and then back on again.
NOTE
►
The automatic switch-off is a safety function only and is not intended as
a replacement for switching the appliance off properly using the level
switch 6!
Styling – straightening
For straightening, the hair should be dry and free of styling products. This does
not apply to products designed to promote the straightening process or protect
the hair from the effects of heat.
The appliance is heated up to the desired level and the hair is combed and free
of knots.
■
Separate individual strands.
Twist a strand around the styling brush 2 and pull it down slowly
■
(depending on the type of hair) from the roots to the tips. While doing so,
curl the styling brush 2 inwards a little.
■
Proceed the same way with the other strands.
Once you are finished styling, turn the level switch 6 to "0" and pull out the
■
plug from the mains power socket.
│
GB │ IE
■
8
The appliance is switched off, both LEDs 4/5 are off
for fine hair (the LED for fine hair (level 1) 5 flashes)
for thick hair (the LED for thick hair (level 2) 4 flashes)
SBHS 50 B1
Advertisement
Chapters
Table of Contents
