Table of Contents
Advertisement
◆
Motor Maintenance
1.
Please check your motor frequently and tighten any loose screws or nuts, to prevent the vehicle from breaking down due to disconnected wires.
2.
The brushless motors are not waterproof, so avoid riding through water deeper than the lower edge of the electric wheel hub to avoid motor failure.
◆
Chain Maintenance
1.
We recommend cleaning the chain after each ride, especially in rainy and humid environments. Use a dry cloth to wipe the chain and its accessories
clean. Use a brush to remove sand and dirt stuck in the chain, along with use warm soapy water if needed. Do not use strong acidic or alkaline cleaning
agents (such as rust remover), because these chemicals can damage the chain.
2.
Apply lubricating oil after cleaning to avoid rust. First, make sure the chain is dry, and then apply the lubricating oil into the bearings.
3.
To prevent unnecessary chain wear, try to maintain a vertical chain position when shifting gears (do not use the smallest gear with the smallest flywheel,
or the largest gear with the largest flywheel, etc.).
◆
Front Fork Maintenance
1.
Always use a clean, oil-free lint-free cloth with plain or soapy water to clean your bike. To prevent water from flowing into the front fork, you can turn the
bike upside down. Dry with a lint-free towel after washing. Pay specific attention to the inner tube and the dust seal to reduce wear and prevent thinning
of the inner tube, which can lead to significant damage if the a luminum is exposed to air.
2.
We recommend using a front fork dust cover to protect the inner tube of your front fork. This prevents dust from entering as well as hard objects from
hitting the inner tube.
Warranty
YotoBike regularly reviews and updates its official Warranty Policy to reflect developments and optimize customer support. For the latest coverage details,
please visit our website and download the current version: www.yotobike.com
34
Advertisement
Table of Contents
