Table of Contents
Advertisement
◆
Charging Procedure For Off-bike Charging
Step 1:
Use the key to unlock the battery . While holding the battery with one hand, detach the battery by turning the release switch located on the
underside of the frame .
NOTICE:
Please write down the serial number found on the battery benea failure reporting. Products that have the serial number and/or
barcode removed, defaced, damaged, altered, or made illegible wiby the warranty
.
Step 2:
Maximize Your Battery Life
Follow these simple steps for safe and efficient charging:
Plug it in: Connect the plug attached to the transformer (Plug 1) into your standard home AC power outlet (110/220 V, 50/60 Hz). No need to
choose voltage, the charger will automatically adjust.
Connect to the Battery: Gently insert the DC plug (Plug 2) into the designated charging socket on your battery.
Charge Up: That's it! Relax as your battery gets a power boost.
Why this order matters: Following these steps helps protect your battery and extend its lifespan by minimizing the risk of damage
caused by improper charging.
Note: Don't try to open the charger to manually select voltage, it's designed to automatically detect and adapt to your power outlet.
Plug 1
Plug 3
Plug 2
27
Advertisement
Table of Contents
