Table of Contents
Advertisement
◆
Walk & Push Assist Mode
Press and hold the
for 2 seconds, and the display will enter the power-assisted implementation state, and the local display of gear display will be "
Release the
, exit the Walk assist mode, and return to the normal display interface. The interface of Walk assist mode switching is as follows (only in
the implementation state):
◆
Headlight Switch
Press the
key for a long time, and after 1 second, the headlight will be turned on (with the support of the controller), the display interface will be switched to
night mode, and the headlight indicator icon will be lit up. At the same time, press the
display interface will be switched to daytime mode, and the headlight indicator icon will go out.
The daytime mode/night mode of the display interface is as follows
key for a long time again. After 1 second, the headlight will be turned off, the
".
21
Advertisement
Table of Contents
