Table of Contents
Advertisement
◆
Pedals Installation (15mm wrench)
Make sure your pedals are installed on the correct side, as installing on the wrong side will damage the threads. Indicators for the right pedal (R) and the left
pedal (L) can be found in two places: the stickers on the plast ic cover, and the bottom of the pedal threads.
Before you install the pedals, apply a small amount of waterproof grease onto the spindle. Start threading the pedal on by hand to ensure the pedal is going
in perfectly straight, rotating in the direction of the pointer shown on the crank. If it is not spinning smoothly, make doubly sure that you have the correct left or
right pedal. After initial hand-tightening, finish tightening the pedals with a standard 15mm wrench .
11
Advertisement
Table of Contents
