Table of Contents
Advertisement
Operation
◆
Safety Checks
Test the battery lock security.
Ensure the key port is aligned in the "lock" position.
Ensure proper handlebar and seat adjustment of the bike to the rider.
Ensure the handlebar faceplate bolts and seatpost quick release are fully and properly secured. Make sure the throttle is back to its original position.
◆
Turn On/Off Display
Keep the normal connection state between the display and the controller, press the" M "key for 2 seconds when the display is turned off, and the display
will fully display the startup interface, then enter the basic interface normally and start working; Long press the" M "(2 seconds) in the power-on state,
and the display will turn off. If the rider does not operate the meter for 5 minutes (speed is 0), the meter will automatically turn off.
◆
Power-on Password
Enter the password input interface after the startup screen of the display. If the password is not entered or entered incorrectly within 30s of countdown,
the display will automatically shut down. Enter the password correctly, and enter the normal riding interface. (The display factory power-on password is
not enabled by default)
Press the"
M
"key to select the number of password digits from left to right, press the
the"
M
"key after the four-digit password input is completed, and the password will enter the boot interface correctly. If the password is wrong, it needs to
be re-entered.
NOTICE:
The boot password function can be turned on or off in the setting interface, and the password can be changed.
/
key to select the password value of the current digit, press
19
Advertisement
Table of Contents
