Yoto Lion Owner's Manual page 11

◆ Headlight & Front Fender (5mm Hex Wrench )
The headlight and front fender are both secured by a single bolt, so the front fender must be installed together with the headlight. If you prefer not to have a
front fender, you may install the headlight by itself.
Step 1: Loosen the bolt on the fork brace. Align the bolt holes of both your headlight and the front fender together with the hole on the fork brace, then
reinsert the bolt through all holes and tighten the bolt .
Step 2: Connect the light wire connectors together. Pay careful attention to the arrows on the wire connectors, making sure the arrows align with each other
to avoid damaging the interior circuitry.
9