Table of Contents
Advertisement
Safety and Care Instructions
To ensure safe riding conditions and maximize e-bike longevity, you must follow the guidelines outlined below:
•
To clean the e-bike, wipe the frame with a damp cloth soaked in a mild, non-abrasive, non-corrosive detergent mixture. Wipe or spray all unpainted
parts with anti-rust treatment after being used in coastal areas or areas with salty air or water.
•
Never immerse the bike or any components in water, as the electrical system may be damaged. If the hub and bottom bracket bearings have been
submerged in water, they should be removed and re-greased (th is will prevent accelerated bearing deterioration).
•
Periodically check wiring and connectors to ensure there is no damage, and the connections are secure.
•
Store under shelter, avoiding extended exposure to cold or inclement weather. If exposed to rain or excess moisture, dry your bicycle afterward and apply
anti-rust treatment to the chain and any other unpainted steel surfaces.
•
Regularly clean and lubricate all moving parts, tighten components and adjust as required.
•
Your cables, spokes, and chain will stretch after an initial break in period of 80-160 km, and additionally bolted connections can loosen with time and
usage. Therefore, we suggest you contact a certified bicycle mechanic every two months to ensure your bike is safe and problem-free for years of use.
•
If the paint has become scratched, or the metal chipped, use touch-up paint to prevent rust (clear nail polish can also be used as a preventative
measure).
•
Damage from corrosion is not covered under warranty, therefore special care should be given to protect and extend the life of your bike.
Maintenance
◆
Battery Maintenance (48V 20AH Samsung/LG Lithium-ion battery)
1.
Don't fully drain your battery. Turn off the power when the battery charge is low.
2.
Fully charge the battery after each use, no matter how much power is used. This will prolong the battery life. If the battery is not used for a long time,
store the battery with a full charge and charge it once a month.
3.
The Yoto Bike can be safely ridden in light rain. However, riding through very heavy downpours or through flooded streets is not recommended, as the
crank and/or motor can get wet, which may cause problems.
4.
Keep the battery away from open flame or a high-temperature heat source. Do not expose the battery to direct sunlight or recharge immediately after
use in high-temperature weather.
33
Advertisement
Table of Contents
