Table of Contents

Advertisement

Recipe Mode

(Boil Slowly to Enrich Flavor)
After pressure cooking, stew cooking (boil slowly
to enrich flavor) starts automatically to permeate
flavors into ingredients..
Place the ingredients in the cooking pot.
Be sure to add liquid keeping between
the minimum and maximum lines.
Add ingredients with thick texture,
such as curry paste, only after pressure
cooking.
See the supplied recipe book for
details.
Place the cooking pot in the main unit.
Check there are no grains of rice, foreign objects or
grime on the temperature sensor or heating plate before
placing the cooking pot in the main unit.
If there are any foreign objects, grime, water droplets or
moisture, wipe before placing cooking pot in.
Make sure that the lid is dry before closing.
Close and lock
the lid.
Inspect before closing the lid. (P. 15)
Requests
Check that the pressure regulator and sealing ring are correctly attached
to the lid.
Connect the main unit and a power outlet using the power cord.
The buzzer will sound and
displayed.
If no operations are made within 30 seconds after turning on
the power, the product goes into sleep mode and
displayed.
18
MAX line display
will be
is
Turn the control knob to select
the Recipe Mode or Cooking Mode.
咖哩/燉菜
Curry/stew
湯/燴菜
Soup
洋芋燉肉
Meat stew
日式角煮
Stew
魚/燉蘿蔔
Fish stew
Where necessary, set the
cooking time.
In the Recipe Mode, set the pressure cooking time
(P1) and the stew cooking time (P2) separately.
Press the 開始/取消 button to start cooking
immediately.
①Press
The
lamp will flash and the
default cooking time (P1) for
pressure cooking will be displayed.
② Turn the control knob to set the
pressure cooking time (P1), and
press the control knob to confirm.
See P. 17 for the number of hours available for each mode.
The time is displayed as "P1:(minutes)". (E.g. If "P1:10", then pressure cooking will be
performed for 10 minutes.)
The setting time excludes preheat.
③ The default cooking time (P2) for stew cooking will be displayed. Turn the control knob
to set the stew cooking time, and press the control knob to confirm.
See P. 17 for the number of hours
available for each mode.
The time is displayed as
"P2:(minutes)". (E.g. If "P2:20", then
cooking will be performed for
20 minutes.)
The temperature cannot be
changed in the recipe mode.
When trying to set the temperature,
the cooking temperature and
"AUtO" are displayed alternately.
Once the cooking mode is selected, the
default cooking time will be displayed.
EN
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cy360170

Table of Contents