Permobil M5 Corpus User Manual page 65

Event
The wheelchair cannot be driven.
The wheelchair switches itself off after a
certain period of inactivity (20–30
minutes).
The wheelchair stops while being driven.
The wheelchair can only be driven at
reduced speed.
Possible cause
The battery charger is connected.
The wheelchair is in freewheel mode.
The wheelchair is locked.
A seat function has triggered the
automatic drive inhibit.
The motors have become too warm.
The energy saving mode has been
activated.
The main circuit breaker has tripped.
A seat function has triggered the
automatic speed restriction.
Remedy
Disconnect the battery charger.
Exit freewheel mode and restart the
wheelchair.
Unlock the wheelchair.
Make sure that the backrest and the leg
support are not tilted and that the seat is
not tilted or lifted.
Turn off the wheelchair and wait for the
motors to cool down.
Press the start button on the control panel
to turn on the wheelchair again.
Reset the main circuit breaker once. See
page 37.
Make sure that the backrest and the leg
rest are not tilted and that the seat is not
tilted or lifted.
Troubleshooting - 65