Permobil M5 Corpus User Manual page 49

This is how you adjust the height of the footplates.
Adjusts both footplates to the same height
Adjusts the footplates separately, if you prefer them at different heights
1. Undo the locking screws.
2. Adjust the footplates to the preferred height.
3. Tighten the locking screws.
4. Make sure that the footplates are secured.
5. Push the leg support cover into place.
6. Tighten the two screws.
This is how you adjust the angle of the footplates. You can adjust the
footplates separately if you prefer them at different angles.
Allen key 5 mm
Spanner 10 mm
1. Tilt up the footplate.
2. Loosen the lock nut .
3. Turn the stop screw up or down until the footplate angle is in the
preferred position.
4. Tighten the lock nut .
Wheelchair usage - 49