User Set Mode - Vertex Standard VX-P920 Series Operating Manual

The VX-P920/-P970 includes a "User Set (Menu)"
Mode which allows the user to define or configure
various settings, such as Beep On/Off, Squelch, LCD
contrast, etc. To activate the "User Set (Menu)"
Mode:
Press the assigned programmable key for the
"SET" function to enter the "User Set Mode."
Select the User Set Mode Item you want change
using the CH selector knob.
Press the MONITOR/LAMP button to select the
status of the selected item.
Press PTT switch to exit to normal operation.
24
U S M
SER ET ODE
D
ISPLAY
1 SQL
2 SCN List
3 BEEP
4 BELL
5 Lighting
6 Lock
7 Group
8 SCAN
9 DW
10 TA
11 AF MinVR
12 Beep VR
13 Contrast
14 Pitch
VX-P920/-P970 S
D
ESCRIPTION
Select the Squelch Threshold Level
Select the Scan List "User" or "Dealer"
Set the Beep On/Off
Set the Bell On/Off
(Bell engaged by sub-audible CTCSS/DCS)
Set the BUSY/TX LED On/Off
Set the Lock function to be Locked
(Key/PTT/Key+PTT)
Set the Operation Group
Set the Scan status
(same function as Scan key)
Set the Dual Watch status
(same function as DW key)
Set the Talk Around status
(same function as TA key)
Set the Minimum Volume level
Set the Beep volume level
Set the LCD contrast
Select the Special Receive Audio Response
O
ERIES PERATING
M
ANUAL