Table of Contents
Advertisement
Quick Links
SUMAKE
Specification:
Capacity
Punch Hole
Overall Length
Air Inlet (PT)
Air Hose (I.D.)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
PNEUMATIC TOOLS
Air Punch & Flange
Punch Dia. 5mm
ST-6652F
1.6 mm
Dia. 5 mm
10" (255 mm)
1/4" (6.35 mm)
3/8" (10 mm)
90 psi (6.3 bar)
3.0 lbs (1.4 kg)
Noise and Vibration:
Vibration
EN ISO 20643
Sound Pressure Level
No Load:
2.4 m/s²
Uncertainty
²
K= 1.5 m/s
Noise
Remark
EN ISO 15744
Please always
No load: 71 dB(A)
wear ear
protector at
environment
Sound power level
noise level >
No load: 82 dB(A)
80 dB(A) due
to risk of
impaired
Uncertainty
hearing!
K= 3dB
ST-6652F-S-2010C-CFF
Advertisement
Table of Contents
Related Manuals for Sumake ST-6652F
Summary of Contents for Sumake ST-6652F
- Page 1 No load: 82 dB(A) 80 dB(A) due to risk of Air Pressure 90 psi (6.3 bar) impaired Uncertainty Uncertainty hearing! ² K= 1.5 m/s K= 3dB Net Weight 3.0 lbs (1.4 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 ST-6652F-S-2010C-CFF...
- Page 2 DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： AIR PUNCH & FLANGE PUNCH DIA. 5MM Model/ Serial No.：ST-6652F to which this declaration applies, complies with these normative documents: ...
- Page 3 So, install an air There is no user serviceable part inside this tool. Sumake is a manufacturer and exporter of air tools Please send the tool to a qualified personnel or our filter and on oiler between the compressor and the since established.
- Page 4 ST-6652F AIR PUNCH & FLANGE PUNCH DIA. 5MM PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty 6652F-01 Clamp 6652F-20 Throttle Lever 6652F-02 Set Screw 6652F-21 Spring Pin 6652F-03 Punch Die 6652F-22 O-Ring 6652F-04 Guide Bushing 6652F-23 Push Rod...
Need help?
Do you have a question about the ST-6652F and is the answer not in the manual?
Questions and answers