Advertisement
Quick Links
SUMAKE
Specification:
Blow Per Min
Piston Diameter
Piston Stroke
Air Consumption
Overall Length
Air Inlet (PT)
Air Hose (I.D.)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
PNEUMATIC TOOLS
1" Air Riveting Hammer
ST-2401
2,850 b.p.m.
9/16" (14.3 mm)
1-3/8" (35 mm)
14 CFM (396 L/min)
4-1/2" (115 mm)
1/4" (6.35mm)
3/8" (10 mm)
90 psi (6.3 bar)
2.2 lbs (1.0 kg)
Noise and Vibration:
Vibration
EN ISO 28927-10
Sound Pressure Level
Load:
22.1 m/s²
Sound power level
Uncertainty
²
K= 1.5 m/s
Noise
EN ISO 15744
Please always
load: 100 dB(A)
protector at
environment
load: 111 dB(A)
noise level > 80
dB(A) due to
risk of impaired
Uncertainty
K= 3dB
ST-2401-S-1409B-FYF
Remark
wear ear
hearing!
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Sumake ST-2401
Summary of Contents for Sumake ST-2401
- Page 1 3/8” (10 mm) dB(A) due to risk of impaired Air Pressure 90 psi (6.3 bar) Uncertainty Uncertainty hearing! ² K= 1.5 m/s K= 3dB Net Weight 2.2 lbs (1.0 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 ST-2401-S-1409B-FYF...
-
Page 2: Ec Declaration Of Conformity
DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： 1" AIR RIVETING HAMMER Model/ Serial No.：ST-2401 to which this declaration applies, complies with these normative documents: ... - Page 3 R e g u l a to r d a i l y the service division of our company. A portion of the water content, however, is ST-2401-I-1102A-FY condensed in the piping, and can enter the tool...
-
Page 4: Parts List
ST-2401 1" AIR RIVETING HAMMER (PISTOL TYPE) PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty 2401-01 Handle 2401-17 Assistant Lever 2401-07 2401-18 Lever 2401-09 Throttle Bush 2401-19 Stopper Pin 2401-10 Inlet Bushing 2401-20 Exhaust Cover 2401-11 Valve Stem... - Page 5 HAMMER Original instructions SUMAKE Industrial Co. Ltd.
- Page 6 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 7 avoiding awkward off-balanced postures. The operator should change posture during extended tasks, which can help avoid discomfort and fatigue. 3. If the operator experiences symptoms, such as persistent or recurring discomfort, pain, throbbing, aching, tingling, numbness, burning sensations or stiffness, these warning signs should not be ignored. The operator should tell the employer and consult a qualified health professional.
- Page 8 7. Whenever universal twist couplings (claw couplings) are used, lock pins shall be installed and whipcheck safety cables shall be used to safeguard against possible hose-to-tool and hose-and-hose connection failure. 8. Do not exceed the maximum air pressure stated on the tool. 9.
Need help?
Do you have a question about the ST-2401 and is the answer not in the manual?
Questions and answers