Table of Contents
Advertisement
DVD
CD
Basic playback
This owner's manual explains the basic instructions of this unit. Some DVD discs are produced
in a manner that allows specific or limited operation during playback. As such, the unit may not
respond to all operating commands. This is not a defect in the unit. Refer to the instructions
accompanying the DVD disc.
"
" may appear on the screen during operation. A "
is not permitted by the unit or disc.
Playing a Disc
1. Slide the POWER ON/OFF switch on the left side of unit to ON.
2. Slide the AV IN / DVD switch on the right side of unit to select DVD mode.
See CUSTOMIZING THE FUNCTION SETTINGS (page 29 to 29) before proceeding to step 3.
3. Press the OPEN switch to open the disc door.
4. Hold the disc by its sides and carefully place it onto the central spindle in the disc compartment, with the label
side facing up; press the disc down until you hear a "click".
5. Push the door to close.
It takes a short while for your unit to load the disc. After loading, the unit will automatically start playing most DVDs.
6. If the DVD does not start automatically, press the
Pausing playback (still mode)
Press the
II
PAUSE button. To resume normal playback, press the
Stopping playback
Press the
STOP button to interrupt playback. To resume playback, press the
If you press the
STOP button twice, the unit's memory will be cleared and pressing the
the disc to the beginning.
Skipping to a different track
• Press the
PREV button repeatedly to skip to the start of the current or previous track.
• Press the
NEXT button to skip to the next track.
• For audio CD disc, use the number buttons (remote control only) to jump to a particular track number.
PLAYING A DISC
PLAY button.
E - 17
" means that the desired operation
PLAY button.
PLAY button.
PLAY button will reset
(continued on next page)
(continued on next page)
(continued on next page)
(continued on next page)
(continued on next page)
Hide quick links:
Advertisement
Table of Contents
