Control Reference Guide - Venturer PVS1971 Owner's Manual

Remote Control
1) ZOOM button
Zoom into an image of a DVD.
TV MODE button
In stop mode, select whether to output the
video signal. TV shows "AUTO" means output
signal depends on DVD (either NTSC or PAL).
TV shows "PAL" or "NTSC" which means output
signal fixed to PAL or NTSC.
2) STOP button
Stop playing a disc.
PLAY button
Press to start or resume playback a disc.
PAUSE button
Pause playback, frame advance.
3) PREV button
Move backwards through titles, chapters or
tracks on a disc.
4) / SEARCH buttons
SEARCH: Fast reverse playback.
SEARCH: Fast forward playback.
5) Number (0 - 9) buttons
Use when creating programs, and entering a
parental level password. To select a CD/MP3
track directly.
6) MEM / ANGLE button
In stop mode, enter the number of a selected
chapter or track.
During DVD playing, switch the camera angle
of the video presentation when scenes with
multiple camera angles are recorded on a
DVD.
7) REPEAT A - B button
Perform point-to-point repeat playback on a
DVD or CD.

CONTROL REFERENCE GUIDE

8) STANDBY button
Press to switch between standby and on.
9) NEXT button
Move forward through titles, chapters or tracks on
a disc.
10) Cursor ( , ,
Use to highlight selections on a menu screen and
make adjustments to certain settings.
ENTER button
Confirm selections on a menu screen.
11) AUDIO button
Select one of the audio sound tracks programmed
on a DVD or select the audio output mode on a
AUDIO CD.
12) SUBTITLE/RETURN button
Select one of the subtitle languages programmed
on a DVD.
Return to the normal operation after using the
SETUP menu of a DVD.
13) GOTO button
Skip directly to a specific location on a DVD disc.
14) DISPLAY button
Change disc status information displayed on the
screen.
15) MENU button
Open and close DVD menu.
16) SETUP/REPEAT-DISC button
In stop mode, Open and close the SETUP menu
of the unit.
Repeat chapter or title of a DVD.
Repeat single track or whole CD.
E - 6
, ) buttons