Connecting A Stereo Receiver Or Amplifier; Connections - Venturer PVS1971 Owner's Manual

C. Connecting a Stereo Receiver or Amplifier
Analog connection
Rear of unit
AUDIO/VIDEO CABLE
(included)
Connecting to a Surround Sound System
Rear of unit
Listening to another audio equipment
1. Turn on the Unit.
2. Turn on your audio equipment and follow the instructions provided with it to select the AUDIO IN or DIGITAL IN
function.
Notes:
• You may experience some interference if the radio tuner function is selected while the television is working.
• Make sure to use the correct Audio/Video cable, connecting the plugs incorrectly may cause a weak signal.
• If you have a stereo VCR, make sure you set it to stereo mode.
• Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a videotape, the
resulting copy will be unclear, with poor sound quality. This is NOT caused by a defective DVD system.

CONNECTIONS

(No need to connect the
Yellow video plug)
(Yellow)
(Red)
AUDIO/VIDEO CABLE
(White)
COAXIAL DIGITAL AUDIO CABLE
E - 12
Stereo Receiver
or Amplifier
(Yellow)
(Red)
(White)
Audio equipment with
digital audio input jack