Table of Contents
Advertisement
DVD
CD
Basic playback
This owner's manual explains the basic instructions of this unit. Some DVD discs are produced
in a manner that allows specific or limited operation during playback. As such, the unit may not
respond to all operating commands. This is not a defect in the unit. Refer to the instruction notes
of discs.
"
" may appear on the screen during operation. A "
is not permitted by the unit or disc.
Playing a Disc
1. Slide the POWER ON/OFF switch on the left side of unit to ON.
2. Slide the AV IN / DVD switch on the right side of unit to select DVD mode.
See CUSTOMIZING THE FUNCTION SETTINGS (page 25 to 28) before proceeding to step 3.
3. Slide the OPEN switch to open the disc door.
4. Hold the disc by its sides and carefully fit in onto the central spindle in the of disc compartment, with the label side
facing up; press the disc down until you hear a "click".
5. Push the door to close.
It takes a short while for your unit to load the disc. After loading, on some discs, the unit will automatically start
playback of the disc.
6. If disc play does not start automatically, press the
Pausing playback (still mode)
Press the II PAUSE button. To resume normal playback, press the
Stopping playback
Press the
STOP button to interrupt playback. To resume playback, press the
If you press the
STOP button twice, the unit's memory will be cleared and pressing the
the disc to the beginning.
To skip to a different track
• Press the
PREV button repeatedly to skip to the start of the current or previous track.
• Press the
NEXT button to skip to the next track.
• For audio CD disc, use the number buttons (remote control only) to jump straight to a particular track number.
PLAYING A DISC
PLAY button.
E - 14
" means that the desired operation
PLAY button.
PLAY button.
PLAY button will reset
(continued on next page)
(continued on next page)
(continued on next page)
(continued on next page)
(continued on next page)
Hide quick links:
Advertisement
Table of Contents
