Installing The Stand; Screen Viewing Angle Adjustment; Using Headphones/Earphones - Venturer PVS1971 Owner's Manual

• Use supplied stand installing the monitors stand up on the table.
1) Hold the screws on the monitor's
backward.

SCREEN VIEWING ANGLE ADJUSTMENT

The Monitor is designed to allow users to have a comfortable viewing
angle. The viewing angle can be adjusted as top -12°~ +12°.
1. Push screen frame to adjust viewing angle.
Caution:
• Do not force the screen frame over its maximum viewing angle settings
as stated above. Attempting this will result in damaging the unit.

USING HEADPHONES/EARPHONES

• Turn down the volume before connecting the Headphones/Earphones. Slowly raise the volume with the
headphones/earphones on until your desired volume.
• When headphones/earphones are connected to the monitor, the speakers will be disabled.
• When headphone/earphone are connected to the main unit, the speakers will be disabled.
Caution:
• Avoid listening to sound at excessive levels which could be harmful to your ears.
Bottom of Monitor

INSTALLING THE STAND

2) Put the metal stand in the plastic
stand hole.
Headphones/
Earphones
(3.5mm diameter plug)
E - 9
3) The monitor is stablely stand
up on the table.
Headphone/Earphone
(3.5mm diameter plug)
Right side of Main Unit