Modifying the Sound in Real Time (DSP Filter)
A "filter" is a type of effect.
You can make settings in the following three blocks.
FILTER Block
MODULATOR 1 Block
MODULATOR 2 Block
Giving Character to the Sound (FILTER Block)
Procedure
2;
Use [FREQ RANGE] to select the frequency range that you wish to
modify.
3.
Turn the knobs to adjust the effect.
FILTER
'CH SELECT
2
CUTOFF
This knob modifies the cutoff frequency.
The lower (further toward the left) this is set, the more the high range will be cut, producing a
darker sound. The range of this knob from MIN to MAX covers 100% of the setting you specify by
[FREQ RANGE].
OTE
This setting affects MODULATOR
1Р.15) and MODULATOR
2(P.16).
),
tf
set
RESONANCE
This specifies how much the gain will be raised in the region of the cutoff frequency. Increasing
this value (turning the knob clockwise) will produce a more distinctive sound.
14