Roland DJ-1000 Owner's Manual page 6

Channel/Master Sections
е саа аан ае а а зи н:
Roland PROFESSIONAL аз mxea СЗ. ЈЗОСЮ)
ВРМ ADS
=
[ra] ad
2 wd MASTER / BOOTH
MASTER LEVEL вооты LEVEL
CoN]
©
о
4 ТАН =
5 Е "ES
E Е 2
С» 1 2 -
© о |е
1. iNPUT Select Switches
These switches select the device that will be connected to each channel.
- Channel 1: PHONO 1 «+ LINE 1 LINE2
- Channel 2: PHONO 2 <> LINE 3 «> LINE 4
2. GAIN Knobs
Use these knobs to adjust the level so that the input signal will be at the optimal level.Try
to get it so the "0" position on the level meter just barely lights up while you have the
channel fader(5) at the maximum level (at 10).
3. EQ (Equalizer Knobs)
These knobs boost/cut the level at each frequency range.
Each knob will cut its range by maximum of 20 dB when turned fully counterclockwise,
and boost by a maximum of 16 dB when turned fully clockwise.
- HIGH: Adjust the level of the high frequency range. >for cymbals and high-pitched instruments
- MID: Adjust the level of the middle frequency range. >for vocals
- LOW: Adjust the level of the low frequency range. >for bass,bass drum etc.