I n s ta l l a t i o n
Your new Velodyne subwoofer provides for a number of installation options. Read all the
installation information below in order to determine which installation option is best suited for
your system. Remember to perform all installation procedures with system power turned
off to prevent possible damage.
Figure 1. MicroVee Back Panel
I n p u t s
Your new subwoofer is equipped with speaker-level, line-level, and MINI-JACK inputs. Use the
LINE LEVEL jacks when connecting your subwoofer to a pre-amp, signal processor, line-level
crossover or receiver with pre-amp level outputs. The SPEAKER LEVEL jacks connect directly
to the speaker outputs of any amplifier, integrated amplifier or receiver. Your amplifier section
will notice no additional loading effects when you use these inputs due to their very high
impedance. Use the MINI-JACK inputs when connecting to a docking station or personal
audio system.
Important!!! Do not use any of the LINE LEVEL, SPEAKER LEVEL, and MINI-JACK
.
connections simultaneously!
w w w . v e l o d y n e . c o m
3
MicroVee User's Manual
Need help?
Do you have a question about the MicroVee and is the answer not in the manual?