Table of Contents
Advertisement
1) Drill a ½" hole in the sink or the counter top, or use
an existing hole.
2) Slide chrome cover plate and rubber gasket on to
stem of faucet and place faucet onto sink, with the
stem going through the hole.
3) Place metal slotted washer over threaded
stem of faucet.
4) Tighten nut from under the counter
surface to lock the faucet into place.
5) Thread the faucet connector onto
threaded stem of faucet. Do not use
Teflon tape.
6) Connect blue 3/8" tubing to faucet connector.
MOUNTING THE FAUCET
Air Gap Faucet (Optional)
1) Drill a 7/8" hole in the sink or the counter top, or
use an existing hole.
2) Slide chrome cover plate and rubber gasket on to
stem of faucet and place faucet onto sink, with the
stem going through the hole.
3) Place metal slotted washer over
threaded stem of faucet.
4) Place plastic spacer over
threaded stem of faucet locking
in place, slotted washer
onto countertop.
5) Tighten nut from under the
counter surface to lock the faucet
into place.
6) Attach red ¼'' drain water discharge
line to DRAIN INPUT barb. And red 3/8'' drain line to
DRAIN OUTPUT barb as shown.
7) Thread the faucet connector onto threaded stem of faucet. Do not use Teflon tape.
8) Connect blue 3/8" tubing to faucet connector.
MOUNTING THE FAUCET
Standard Faucet
Chrome cover plate
Sink or counter top material
Chrome cover plate
Sink or counter top material
Drain line from air gap
to drain clamp 3/8" red tubing
Drain line to air gap
1/4" red tubing
7
Rubber gasket
Big metal washer
Metal toothed washer
Faucet nut
Faucet connector
3/8" X 7/16"
Blue 3/8" tubing
Rubber gasket
Slotted washer
Metal toothed washer
Faucet nut
Faucet connector
3/8" X 7/16"
Blue 3/8" tubing
Advertisement
Table of Contents
