Table of Contents
Advertisement
TimeTrax™ Sync Clock System
Quick Start Guide
WIRELESS RF TRANSMITTER INSTALLATION
1
Choose appropriate location to install 9T1W1 Wireless RF Transmitter.
GPS Time Source
250,000 sq ft or less
250,000 SQ FT
More than 250,000 sq ft
250,000 SQ FT
Multi-Story Facility
Locate indoors
in dry location
Attach supplied antenna to top of 9T1WI Wireless RF Transmitter by rotating
2
in clockwise direction.¹
Place or mount transmitter so antenna is positioned vertically. This is re-
3
quired for optimum performance.Drill holes using template as a guide.
Connect Ethernet Port to computer or network. The transmitter will be
4
confirgurable from anywhere on local network.
If GPS Receiver is to be used as time source, install and connect to GPS port
5
of transmitter.
Connect power supply (supplied) to transmitter and to any standard wall
6
outlet.
TTSync software controls more than one Wireless RF Secondary Transmit-
7
ter (42337 and/or S9DSXOLAUB). TTSync software will discover the device &
assign global setting.
¹ Using anything other than included Power Supply or included Antenna in a horizontal
orientation may be unsafe, cause improper operation, and violates FCC regulations.
4
INSTALLATION
Locate within 50ft cable
reach
Locate centrally
Contact customer support
@ 888.479.7264 ext 1
Locate on middle floor
Do not locate where
people regularly
come within 8in
888.479.7264
Advertisement
Table of Contents
