Navigate To Bell Schedule - Pyramid SIMPLE SMART TIMETRAX Sync Quick Start Manual

TimeTrax™ Sync Clock System
Quick Start Guide
TIME ZONE; DAYLIGHT SAVINGS TIME; TIME SOURCE; REFRESH INTERVAL AT
GLOBAL SETTINGS
NTP Time Source (MAX 3);Time Zone & Daylight Savings Time will automatically
default to Eastern Standard Time. To change global settings, follow these
steps:
Click on Edit Global Setting Tab.Press enter to confirm.
1
2
Click on arrow in Time Zone window to access drop down menu.
3
Select Time Zone.
Select Time Zone for automatic Daylight Savings Settings.
4
5 Click "Time Source": NTP/NTP SERVERS or PC TIME.
6
Click "Refresh Interval"; Hr, Min, Sec.
7
Click "Save & Close".
CUSTOM TIME SOURCE SETTING FOR INDIVIDUAL DEVICE
To change settings for individuals devices, follow these steps.
Click "EDIT" on device from discovery list.
1
2
Click on Custom Settings button.
3
Click on - NTP / NTP SERVERS or
-"PC TIME" or
-"GPS" (only if installed for Transmitter)
4 Click "DEVICE NAME" - set new one
Select "TIME ZONE" & "DAYLIGHT SAVINGS TIME"
5
6
Click "SAVE & CLOSE"

NAVIGATE TO BELL SCHEDULE

Open an App - click "CLOCK" (top right corner) - click "BELL SCHEDULE"
1
-"ADD BELL SCHEDULE" - "SAVE & CLOSE"
Click "EDIT" - "ADD BELL EVENT"
2
After each event set click "SAVE & CLOSE"
3
4 To upload Bell Schedule to Transmitter(s) click "SAVE BELL SCHEDULE" - "SELECT" (unit)
- "SAVE & CLOSE"
To go back to the list all clocks - click "CLOCK" again then click "HARDWARE MANAGER"
5
Transmitter(s) must be "ACTIVE"
pyramidtimesystems.com SPECIFICATIONS 7