Table of Contents
Advertisement
TimeTrax™ Sync Clock System
Quick Start Guide
ANALOG CLOCKS
Complete Transmitter installation and/or software set-up prior to
1
clock installation
2
Choose appropriate location to install clock(s).
Wired clock(s) should be hardwired to standard electrical box by
3
qualified electrician.
Mount clock(s) using any of the following options:
4
(1) Direct Wall Mount: Mount to surface using template (included) &
(2) #8 screws. Insert screws into keyhole slots in back of clock.
(2) Security Mount: Using security bracket & template (included),
screw bracket directly to surface with (2) #8 screws. To hang
clock, align holes on back of clock with security bracket hooks.
(3) Dual Clock Wall or Ceiling Mount: Use optional brackets.
CLOCK MOUNTING BRACKETS
42320
42443
Clock(s) will automatically synchronize upon completion of transmitter
5
and/or software set-up. Clock(s) must be within approximately 250,000 sq. ft.
range of transmitter. Transmitter is necessary to update RF Clocks.
The battery operated clock(s) search for updated signal once per day at 2am and
after battery installation.
10
ANALOG CLOCKS
Locate indoors in dry location unless
using weather cover (see p.11)
Dual Clock Wall Bracket Kit, 13in Analog, 4 x 6 Digital
Dual Clock Ceiling Bracket Kit, Analog & Digital
888.479.7264
Advertisement
Table of Contents
