Table of Contents
Advertisement
TimeTrax™ Sync Clock System
Quick Start Guide
ETHERNET AUX GPS : SPECIFICATIONS
ETHERNET PORT (STANDARD RJ45 FEMALE CONNECTOR):
Auto Speed 10/100TX
Auto MDI/MDIX
ETHERNET:
Auto Discovery
DHCP
NTP Source
NTP Server
NOTE: ANY IP SETTINGS ABOVE CAN BE SET OR OVERRIDDEN BY TIMETRAX SYNC™ SOFTWARE.
OPTIONAL AUXILIARY PORT (RJ45 COMPATIBLE FEMALE CONNECTOR) :
BCD out/AUX
OPTIONAL GPS PORT (RJ45 COMPATIBLE FEMALE CONNECTOR) :
IEC RS232 Compatible
GPS Signal Receiver
TT SYNC WIRELESS RF TRANSMITTER : SPECIFICATIONS
RF Power Output
Frequency Range
Channel Spacing
Modulation
Data
Frequency Stability
Clock Time Update
NTP Time Update
GPS Time Update
Coverage
Shelf
Size (WxHxD)
Weight
Wall
Size (WxHxD)
Weight
Antenna Length
Required Voltage
Weight
8
SPECIFICATIONS
Any 10 or 100Mbs, Switch or PC
No Crossover cable is needed
No IP address or DHCP server is required to discover trans-
mitter, direct connect
IP Address, Subnet Mask, Gateway
List from TTSync Software; pull time from Internet or
Intranet
RFC2030 compliant Time Server; serve time to Internet or
intranet
-Sends BCD signals to TimeTrax™ analog & digital clocks
(wired)
-Sends BCD signals to Pyramid Tone Systems
4800 Baud I/O to receive NMEA time and 1 second edge sync
signals
Part #42328
1 watt (30dBm)
902-928MHz Frequency Hopping Technology
~200KHz
Raised Cosine 2FSK Modulation; 10KHz Maximum Deviation
Encrypted 2400 BPS
10ppm
Every 20 seconds
6 Hr Default (can be set)
Once per second
Approximately 250,000 sq ft
6.5in x 2.5in x 6.5in (16.5cm x 6.5cm x 160.5cm)
2.2lbs (1.0kg)
5.5in x 5in x 1.75in (13.9cm x 12.7cm x 4.4cm)
1.6lbs (0.73kg)
5in (12.7cm)
Universal 100-240VAC 50/60Hz
4.3lbs (1.95kg)
888.479.7264
Advertisement
Table of Contents
