Table of Contents
Advertisement
TimeTrax™ Sync Clock System
Quick Start Guide
DIGITAL CLOCKS
Complete Transmitter installation & software set-up prior to clock
1
installation.
Choose appropriate location to install clock(s).
2
Wired clock(s) should be hardwired to standard electrical box by
3
qualified electrician.
Mount clock(s) using any of the following options:
4
(1) Direct Wall Mount: Mount to surface using template (included) &
(2) #8 screws. Insert screws into keyhole slots in back of clock.
(2) Security Mount: Using security bracket & template (included),
screw bracket directly to surface with (2) #8 screws. To hang
clock, align holes on back of clock with security bracket hooks.
(3) Dual Clock Wall or Ceiling Mount: Use optional brackets
CLOCK MOUNTING BRACKETS
42247
42320
42321
42443
Clock(s) will automatically synchronize upon completion of transmitter
5
& software set-up. Clock(s) must be within approximately
250,000 sq ft range of transmitter. Transmitter is necessary to update RF Clocks.
DIG clocks search for updated signal every 20 seconds.
A
The battery operated DIG clock(s) search for updated signal once per day at 2am
and after battery installation.
To set "Time Format" - Global or custom, click "Edit" then "Advanced"
B
AM/PM (PM = Dot left top corner), Military (24HR)
pyramidtimesystems.com
Locate indoors in dry location unless
using weather cover (see p.11)
Security Mounting Bracket Kit, Digital
Dual Clock Wall Bracket Kit, 13in Analog, 4x6 Digital
Dual Clock Wall Bracket Kit, 2.5x6 & 3x4 Digital
Dual Clock Ceiling Bracket Kit, Analog & Digital
DIGITAL CLOCKS
11
Advertisement
Table of Contents
