Advertisement
TIMETRAX™ SYNC RF ETHERNET TRANSMITTER
Installation Instructions 9T1WI, S9DWXSLAUB
INSTALLATION
Place or mount transmitter so antenna is positioned vertically. This is required for optimum performance.
Connect CAT-5E Ethernet cable (sold separately) into ETHERNET port located on transmitter. Connect free
end of CT-5E cable into Ethernet switch or computer.
Connect power cable into POWER port on transmitter. Plug power supply into standard wall outlet.
If GPS Receiver (part #42328 sold separately) is used as time standard, install and connect to GPS port on
transmitter.
Install TimeTrax™ Sync software. Configure time zone settings according to software instructions.
If using TimeTrax™ Sync RF Wireless Secondary Transmitter (part# S9DSXOLAUB or 42337), connect power
supply (supplied) to secondary transmitter and plug into standard wall outlet. TimeTrax™ Sync software
will discover the device and assign global settings.
ETHERNET
I2256
Page 3 of 5
888.479.7264
pyramidtimesystem.com
Advertisement
