Safety instructions and recommendations In the absence of legislation to the contrary, neither Bertin Technologies Technical assistance nor its subsidiaries shall be held liable, either in contract or in tort, in...
Bertin Technologies is grateful that you have purchased the Coriolis Compact air sampler. BERTIN TECHNOLOGIES The Coriolis Compact is an air sampler that has been designed specifically for collecting micro-organisms through the implementation of cyclonic Parc d’activités du Pas du Lac technology.
Risk of electric shock Warranty In order to avoid any risk of electric shock, the equipment’s power supply BERTIN TECHNOLOGIES guarantees that the equipment is fault-free at the must be connected to an installation that complies with the standards time of shipping.
Stages: A sterile cone is placed onto the unit and locked into position Figure 2: Coriolis Compact description The aspirated air enters the cone The airborne particles adhere to the cone wall The collected particles are recovered by adding suspension...
(<100 Wh), so they are not classed as dangerous goods. When in its carry case, the Coriolis Compact unit may be transported by Operating conditions road without any specific restriction and by air either in the cabin or in the baggage hold of a passenger aircraft.
USER GUIDE CORIOLIS Compact Storage Handle the securing collar with precaution, you don’t need to force the system. The unit must be kept in a dry location at a temperature of between +5°C Check that the quick connect collar is indeed in the locked and +45°C.
5’ Padlock: pressing and holding this button locks the keypad and prevents a collection from being stopped unintentionally once started. The Coriolis Compact unit may be battery-operated or run on a main power supply. Self-testing The system performs self-testing during start-up.
In immediate collection mode, you may set the collection to start without Figure 2: Charging programming and to stop upon user request. Jack socket: For charging the Coriolis Compact 1- Press the “Play” button to 2- The start-up menu Charger: Coriolis Compact charger...
Page 10
USER GUIDE CORIOLIS Compact 3- Press the “Play” button to start 4- Once the required collection 3- Define the settings using 4- Use the arrows to return the collection: the collection time has been reached, press the “Play” button to confirm starts without the “Back”...
USER GUIDE CORIOLIS Compact Otherwise, you can stop the current collection cycle by pressing the “Back” 4.5.3 Advanced collection button. In Advanced collection mode, you may set a collection to start after a delay interval T1, stop after a programmed period T2 and then restart after a timed delay T3, performed over N cycles (T1+T2).
USER GUIDE CORIOLIS Compact 3- Remove the single-use 4- Release the cone from SETTINGS assembly from its position the collection head by The various unit configurations can be accessed in settings mode. unscrewing the latter and add between 0.5 ml and 4...
The decontamination procedure detailed below is that implemented by Bertin during testing. It is recommended that you adapt the decontamination procedure according to the risk of infection. Spray the external parts of the Coriolis Compact with 12° chlorometric bleach Leave to incubate for 30 minutes...
USER GUIDE CORIOLIS Compact APPENDIX 1: EC DECLARATION OF CONFORMITY NOTE Page Page...
Page 15
2500+ documents en ligne sur l’Application Center Join the Bertin Health & Life Sciences community! Bertin Technologies 10 avenue Ampère, 78180 Montigny-le-Bretonneux, France www.bertin-technologies.com...
Need help?
Do you have a question about the CORIOLIS Compact and is the answer not in the manual?
Questions and answers