Table of Contents
Advertisement
INSPECTION
FUJI GW690-III (PROFESSIONAL)/FUJI GSW69Q-III (PROFESSIONAL)
vn. INSPECTION
1.
Fi.m advancing/Shutter charging/Exposure counter advancing/Shutter releasing
1-1
Film loading
With the shutter released, load a 220 film, close the camera back and make sure that:
1)
The camera back is locked securely.
2)
The exposure counter indicates "S".
1-2
Film advancing/Shutter charging
Wind up the film advance lever slowly, leave the film advance lever from the winding up in
a half way before it is completely wound up, and make sure that the film advance lever does
not return.
Continue to wind up the film advance lever, and make sure that the film advancing stops
when the exposure counter advances from "S" to "1".
1-3
Shutter releasing
Set the shutter lock lever to the position where the red mark can be seen (shutter releasing is
allowed), depress the top shutter release, and make sure that the shutter is released and
shutter blades open and close correctly.
1-4
Film selector
Set the film selector to "4EXP", advance the film by checking as described in 1-2 and 1-3
above and make sure that the exposure counter stops at "4".
Next, set the film selector to "8", perform the same inspections, and make sure that both
the film and exposure counter are advanced to the last frame. Open the camera back, and
make sure that the film is taken up correctly without slackness and that the exposure
counter indicates "S".
*
-
50
-
Advertisement
Table of Contents
