FujiFilm PROFESSIONAL GW690-III Service Manual page 42

REASSEMBLY AND ADJUSTMENT
FUJI GW690-I11 (PROFESSIONAL) /FUJI GSW690-111 (PROFESSIONAL)
Fig. V-11
i
4
NOTE:
For the collimator, use one with an objective lens the focal length of
which is as longest as possible.
When only 24LT-2D-TS (F=193.5) is available, apply a flat mirror to
the film rail plane as shown below, and check the objective lens scale at
—0.15±0.1. In this case, however, the value must be fitted to the
7-65x3
A
-39