Output Settings; Editing The Output Audio Settings - Roland BRIDGE CAST X Owner's Manual

Output settings

Output settings
This section explains about the audio output settings.
â
Editing the output audio

Editing the output audio settings

This shows you how to set the delay time for the output audio and modify the audio that's output from the LINE OUT jack and USB
port.
1. On the menu screen, click the "OUTPUT" tab and set the parameters in the respective menus.
Menu
DELAY
LINE OUT MODE
USB OUT MODE
(MOBILE/CONSOLE)
70
settings(P.70)
Value Explanation
Off, On Turns the delay on/off. When this is "On", the audio output is delayed by the
specified time.
* Delay is applied to the STREAM MIX bus audio that's output from the USB
port.
Correcting timing discrepancies between video and audio
When streaming games on your computer, you might notice that what you see
on the game screen is not in sync with the game sound (the audio signal that's
input from the BRIDGE CAST X to your computer). By applying delay to the
audio output, you can make the timing of the video and audio match.
0.0–1000.0 ms Adjusts the delay time (audio latency).
This selects the audio to be output from the LINE OUT jack.
MIC Mic audio (not routed through a bus)
STREAM MIX STREAM MIX bus audio
PHONES SYNC Same audio as the headphones output
When the connection setting for the USB I port is "MOBILE/CONSOLE" or the connection setting for
the USB II port is "MOBILE", this sets the audio that's output from the USB port or ports.
MIC Mic audio (not routed through a bus)
STREAM MIX STREAM MIX bus audio