Adjusting The Mic Audio; Getting Ready To Use A Mic - Roland BRIDGE CAST X Owner's Manual

Adjusting the Mic Audio

Adjusting the Mic Audio
This section explains how to adjust the mic audio.
â
Getting ready to use a mic(P.34)
â
Calibrating the mic sound quality
â
Processing the Mic Audio (Mic
â
Saving the Mic Effect Settings as a
â
Exporting a mic effect preset

Getting ready to use a mic

Here's how to set the type of mic used and the mic input gain (sensitivity).
â
Selecting the type of mic
â
Adjusting the input gain (sensitivity)
Selecting the type of mic
1. On the menu screen, click the "MIC SETUP" tab and set the "MIC TYPE".
Menu Value
MIC TYPE
Select a mic type according to the mic you're using.
XLR
HEADSET
34
(Cleanup)(P.36)
Effects)(P.38)
Preset(P.40)
file(P.43)
Explanation
Dynamic mic, condenser mic
* When a condenser mic is connected, set the rear panel phantom power switch to "48 V".
Doing so supplies phantom power, and [48V] is shown in blue onscreen.
* When connecting a dynamic mic or a condenser mic that operates on battery power, make
sure to set the phantom power switch to "OFF". These types of mics may malfunction when
supplied with phantom power.
Headset