Other Settings - Roland BRIDGE CAST X Owner's Manual

Other Settings

These are the settings for the brightness of the indicators on the BRIDGE CAST X as well as for what the level meters display.
1. On the menu screen, click the "SYSTEM" tab and set the parameters in the respective menus.
Menu Value
LED BRIGHTNESS 0–7
INDICATOR TYPE Sets what is shown by the CH 1–4 level meters.
LEVEL
METER
MUTE DISPLAY When mute is on, this sets how the color indicators light up.
BLINK
OFF
PHONES GAIN Normal
Boost 1
Boost 2
HDCP
Specifies whether HDCP is enabled (ON) or disabled (OFF).
ON
OFF
USB VIDEO Sets the formats that can be selected from the output destination's livestreaming app.
FORMAT
YUY2 & MJPEG
YUY2
Explanation
Adjusts the brightness of all indicators.
* Even with the minimum setting of "0", the indicators do not go completely
dark.
The volume is always shown.
The level meters operate as a level meter that shows the input levels for each
channel.
The volume is shown instead when you operate the CH [1]–[4] knobs on this unit.
The color indicators blink.
The color indicators go dark.
When this is set to "Boost 1" or "Boost 2", this amplifies the headphone volume.
Copy-protected (HDCP) video can be input. HDCP is also added to the video that is
output.
* Video is not output from the USB II port.
* Audio is not output from the USB I and II ports.
Video is output without adding copy protection (HDCP). Note that you cannot
input copy-protected video to this unit.
YUY2 and Motion JPEG can be selected.
Only YUY2 can be selected.
System settings
83