Roland BRIDGE CAST X Owner's Manual page 30

Adjusting the volume (home screen)
MIX LINK button
MUTE/ASSIGN button
functions
LED color slider
Input source
SFX volume setting
button
30
For the mic audio (not routed through a bus) and PERSONAL MIX, use the BRIDGE CAST app to set
which one is being controlled on this unit.
Links/unlinks the two buses (STREAM MIX, PERSONAL MIX). This works the same as the [MIX LINK]
button on the BRIDGE CAST X.
When the link is on, you can adjust the input level while retaining the volume balance for each bus.
* When the input source is "MIC", the MIC audio (not routed through a bus), STREAM MIX bus
and PERSONAL MIX bus are linked.
This sets the functions for the MUTE/ASSIGN [1]–[4] buttons.
CH MUTE ALL (*3)
CH MUTE TO STREAM MIX
(*3)
CH MUTE TO PERSONAL MIX
(*3)
SFX A, SFX B
SFX BEEP
MUTE OUTPUT ALL
MUTE STREAM OUT
MUTE LINE OUT
MUTE PHONES
PROFILE 1–5
GAME EQ 1–5
GAME EQ OFF
MIC EFFECTS 1–5
MIDI CC 1–4 (*1)
SOUND EFFECTS A (BGM
CAST)–SOUND EFFECTS D
(BGM CAST)
Sets the color of the CH1–4 indicators.
The color of the CH 1–4 indicators and LEDs change according to the motion of the LED color slider.
Assigns input sources to the CH [1]–[4] knobs on this unit.
Use the CH [1]–[4] knobs on this unit to change the volume of the assigned input sources.
MIC
AUX
CHAT (*1)
GAME (*1)
MUSIC (*1)
SYSTEM (*1)
CONS/MOBI (*2)
SFX
HDMI
A popup window for setting the volume of SFX A and SFX B appears.
To adjust the volume balance between SFX A and SFX B, use the SFX A or SFX B slider (adjustable
from 0 to 100).
Mutes/unmutes audio for the channels routed to the STREAM MIX
and PERSONAL MIX buses.
When the input source is "MIC", this mutes/unmutes the mic audio
(not routed through a bus) and the mic audio routed to the STREAM
MIX/PERSONAL MIX buses.
Mutes/unmutes audio for the channels routed to the STREAM MIX
bus.
Mutes/unmutes audio for the channels routed to the PERSONAL
MIX bus.
Mutes/unmutes the mic audio (not routed through a bus) and the
mic audio routed to the PERSONAL MIX bus, when the input source
is "MIC".
Plays the sound effect registered for SFX A or SFX B.
You can register a music file (.wav) that you like to SFX A and SFX B.
â
Registering a sound effect(P.31)
Plays a beep sound.
Mutes all output audio.
Mutes/unmutes audio for the STREAM MIX bus audio that's output
from the USB port.
Mutes/unmutes the audio output from the LINE OUT jack.
Mutes/unmutes the headphone or headset audio.
Switches between profile 1–5.
Recalls equalizer presets 1–5.
Turns the equalizer off.
Recalls mic effect presets 1–5.
Transmits MIDI control change messages 1–4 from the MIDI output
port (CTRL) of the USB port.
Plays back the sound effects you selected for SOUND EFFECTS A–D.
â
Using sound effects(P.88)
The audio of the dynamic mic, condenser mic connected to the MIC
jack, or the audio of the headset mic connected to the
PHONES/HEADSET jack
* When this is set to "MIC", you must select the mic type.
â
Selecting the type of mic(P.34)
Audio input from the AUX jack
Audio input from the USB port
Sound effects (SFX A, SFX B, SFX BEEP)
Audio input from HDMI IN 1, 2 connectors