Canon SELPHY CP Series User Manual page 44

Printing without a Power Outlet
To print where no power outlet is available, use Battery Pack NB-CP2LI
(sold separately). On a full charge, up to about 72 sheets* of postcard-size
paper can be printed.
* According to Canon testing. May vary depending on printing conditions.
Attaching the Battery Pack
1
Remove the battery pack
mounting cover.
With the switch held in the direction of the
z z
ER Y
BA TT
arrow ( ), move the cover in the
direction of the arrow (
Air Vent
2
Attach the battery pack.
Slide the terminal-end in the direction of
z z
the arrow ( ) and insert the other end
(
• Battery Pack NB-CP2LH (sold separately) is also supported. On a full charge,
up to about 54 sheets* of postcard-size paper can be printed.
* According to Canon testing. May vary depending on printing conditions.
) to remove.
) until it clicks into place.
Charging the Battery to Use SELPHY
• Once SELPHY is connected to a power outlet
and [ ] blinks on the screen.
• A complete charge for the NB-CP2LI requires approximately 4 hours (at
normal temperatures), after which the [
•
SELPHY can be used even while [
(= 12). However, charging stops. When power is turned off, [
blinks and charging resumes.
• Please keep the SELPHY horizontal while charging. If the SELPHY
is charged while standing upright, it may not charge completely.
• For battery precautions, refer to the battery user manual.
• When [ ] is displayed, place SELPHY in an environment at operating
temperature (= 44), and charge once it has adjusted to the ambient
temperature.
• Response when an [ ] is displayed
- [ ] may appear when charging the NB-CP2LI while the SELPHY is
upright. Unplug the device and remove the NB-CP2LI. After a short while, lay
the device flat and charge it.
- If [ ] appears while the device is horizontal, the battery may need
replacing. Please purchase a new battery.
• When [ ] is displayed, press and hold any button other than <q> for
3 seconds or more to clear [
and while the printer is charging, press any button other than <q>, and
[ ] will appear for around 10 seconds.
(= 12), charging starts
] will disappear.
] is blinking by turning it on
]
]. After the screen is no longer displayed
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB Cable
Troubleshooting
Appendix
43