Canon SELPHY CP Series User Manual page 31

Adjusting the Color Tone (My Colors)
z z Choose special color tones to make prints look distinctive, or choose
sepia or black-and-white prints.
–
Off (default)
Vivid prints with greater
contrast and color
Vivid
saturation
Subdued prints with
less contrast and color
Neutral
saturation
• Turning off SELPHY will restore the default setting of [
• Some color options may prevent red-eye correction
Saturated, natural
colors, as produced
Positive Film
with positive film
Sepia-tone
Sepia
Black and white
B/W
Off].
(= 30).
Reducing the Appearance of Red-Eye (Correct
Red-Eye)
z z Correct images affected by red-eye.
z z Off (default) / On
• Red-eye correction may mistakenly be applied to areas of the image
other than the affected eyes. To avoid this, select [
images affected by red-eye.
• Turning off SELPHY or removing the memory card will restore the default
setting of [ Off].
• Red-eye may not be detected or corrected well on faces covering a very large/
small area of the screen, on bright/dark faces, in shots from the side of or at an
angle to the face, or when part of the face is not visible.
• Red-eye correction is not applied when [Page Layout]
[ 2-up], [ 4-up], [ 8-up], or [
•
Similarly, red-eye correction is not applied when [My Colors]
[ Sepia] or [ B/W].
• The degree of correction may vary depending on cropping, page layout, and
paper size.
Cover
Contents
Part Names
Basic Operations
Print Settings
On] only for
Printing via USB Cable
Troubleshooting
(= 27) is set to Appendix
Index].
(= 30) is set to
30