Canon SELPHY CP Series User Manual page 27

Configuring Settings
1
Access the setting screen.
z z Press the <k> button.
z z
Press the <u><d> buttons to select
[Change Settings], and then press the
<o> button.
2
Select an item and adjust the
setting.
z z Press the <u><d> buttons to select an
item.
z z Press the <l><r> buttons to adjust the
settings, and then press the <v> button
to confirm your choice.
3
Access the image display
screen.
z z Press the <u><d> buttons to select
[Select & Print], and then press the
<o> button.
z z See
feature.
= 26 – 31 for details on each
4
Print.
z z
Select the images
number of prints
press the <p> button to print.
Choosing the Finish (Print Finish)
Example of finish
[ Glossy] [ Pattern 1]
z z
By adding a subtle texture to the surface of prints, you can create a less
glossy finish.
Prints with a glossy surface finish.
Glossy (default)
Applies a slightly rough surface pattern, for a less glossy
Pattern 1
finish.
Applies a fine surface pattern, for a less glossy finish.
Pattern 2
Applies a fine grid-like surface pattern, for a less glossy
Pattern 3
finish.
•
The surface finish may be less noticeable depending on the
printer's internal temperature when you turn it on. Before turning
on the printer and printing, wait until it has adjusted to an ambient
temperature of 10 – 35 °C (50 – 95 °F).
(= 15) and the
(= 15), and then
[ Pattern 2] [ Pattern 3]
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB Cable
Troubleshooting
Appendix
26