Recording With The Timer - JVC DX-E78BK Service Manual

Normal Dubbing,
Step by Step
High Speed Dubbing,
Step by Step
reo O F
=
AX-E78BK
AX-E79TN
Dubbing a Tape
Normal speed Dubbing
1. Insert the cassette for playback into deck A and the cassette for recording into deck B.
Q The type of tape (Normal, CrO, or Metal) used for recording must be the same as that used for
playback.
'
Q DOLBY NR is inactive in dubbing mode regardless of the setting of the NR switch. The dubbed tape
automatically contains the same processing as the source tape.
2. Press the PAUSE button while simultaneously pressing the REC/REC MUTE button.
Press the Play button <4 or » (depending on which side of the tape you want to record from) on deck
A.
4. Press the Play button < or > (depending on which side of the tape you want to record onto) on deck
B.
The tape-to-tape recording starts.
;
»
High Speed Dubbing
Although the quality of the dubbed tape is little less, high speed dubbing is a very convenient way to record
from one tape to another.
Recording selections from several different tapes
When you wantto take selections from several different tapes and combine them onone ta pe during high speed
dubbing, follow these steps:
1. Press the Stop M@ button on deck A.
Creating a Blank During Recording
2. Press the REC/REC MUTE button.
Q A Blank of about 4 seconds is created on the cassette, and then the deck pauses.
Q When the source you are recording from is the CD Player and the CD REC START button is used,
the REC/REC MUTE button will not function.
Recording with the Timer
The Tape Deck can be set up to record a tape automatically. This is especially useful for recording broadcasts
when you aré not around, or late at night when you are asleep.
1, Insert a cassette for recording into deck B
2. Set the timer, by following the steps in "Setting the Timers".
3. Select one of the following sources:
TUNER TIMER REC Records TONER preset stations
-—— — TIMER REC
Records from the source selected before turning off the main Unit.
16
(No.20423) 1-17