Table of Contents
Advertisement
AX-E78BK
AX-E79TN
How to program
Programming Hints
Repeat a selection or the
whole CD |
REPEAT
eZ
DISPLAY
il
1-12 (No.20423)
Programmed Play
You can arrange the tracks to play in any order you like with the Program function. The Remote is very useful
for this because you can select tracks by number with the key pad. You can also use the main Unit.
To program the CD track order, follow this procedure:
1, Press the CD PRGM button on the Remote.
"PRGM" will light up on the Display.
2. Input the track numbers in the order desired using the numeric keys. If you want to use the numeric keys
on the Remote controller, first press the CD 10 KEY button.
*
Example: for track 5 press 5. For track 15, press +10 then 5.
For track 20, press +10 twice. For track 25, press +10 twice then 5. For track 30, press +10 twice then
10. For track 32, press +10 three times then 2.
¢
Your program can include up to 32 tracks, and you can repeat tracks if you wish.
If the total time of all the programmed tracks is 100 minutes or more, the display will show
"._:~~" (since the highest time the display can show is '"99:59".)
3. Press the PLAY/PAUSE P/1l button (or Play > button on the Remote) to start to play, followed by the
next one you enteréd until all the selected tracks are played.
4. To stop the CD during Programmed Play, press the Stop m@ button. To cancel the program, press the CD
PRGM button on the Remote. "PROGRAM" on the Display will go off.
A Few Hints to Make Programming Easier
Repeating a Selection or the Entire Disc
Press the DISPLAY button to show the time you want.
There are four display times:
>
B-
1: 3% 7:44
GSOOODODODOOD
Display mode:
TOTAL REMAIN
Current track:
6th
Total remaining time:
37 minutes 48 seconds
Advertisement
Table of Contents
