Advertisement
e Fit the O-ring to the O-ring groove as shown in
Fig.
CAUTION:
(ee
p y
Use a new O-ring to prevent oil leakage.
NOTE:
Coat the O-ring of sump filter cap with grease.
e When
installing the oil sump filter cap, be sure
to face the arrow mark on the cap to the front.
OIL RING
Install the spacer () into the oil ring groove first.
Then,
install both
side rails), one on each side
of the spacer. The spacer and side rails do not have
a specific top or bottom when they are new. When
reassembling
used
parts,
install
them
in
their
original place and direction.
TOP
RING
AND
2ND
RING
The top ring and 2nd ring differ in the letter of the
top mark. The 2nd ring letter size is larger than the
top one.
Be sure to bring the marked
side to top
when fitting them to the piston,
Letter size
0.87 mm
TOP RING
Advertisement
