Advertisement
e Detach the camshaft end cap (1).
e
Flatten the lock washer and remove the camshaft
sprocket bolts.
e
Remove the camshaft and sprocket.
NOTE:
The
cam
chain
tensioner
bolt ® is to be
removed only when disassembling the engine.
CAUTION:
Do not drop camshaft drive chain, pin, C-ring
or sprocket into the crankcase.
e@ Loosen
the six cylinder
head
nuts diagonally,
then detach the cylinder head.
NOTE:
If it is difficult to remove the cylinder head,
gently
pry
it off while tapping the finless
portion
of the cylinder
head
with a plastic
hammer. Be careful not to break the fins.
@
Remove the cylinder base nuts and cylinder.
4
CAUTION:
If tapping with a plastic hammer is necessary,
do not break the fins.
Advertisement
