Suzuki DR600S Service Manual page 106

FLOAT HEIGHT ADJUSTMENT
To check the float height, invert the carburetor
body, with the float arm
kept free, measure
the
height @) while float arm is just in contact with
needle valve by using calipers.
Bend the tongue (1) as necessary to bring the
height @) to this value.
23.0 + 1.0mm
(0.91 + 0.04 in)
| 09900-20101 [ Vernier calipers
Float height @)
NOTE:
When measuring
float
height, be
sure to
remove the gasket.