Kenwood TH-77A Instruction Manual page 53

7-3. OPERATION
SPEAKER
WITH REMOTE CONTROL
MICROPHONE SMC-33
Notes
1. UP / DOWN will increment continuously if pressed
for longer than 1 second.
2. The microphone switch is operational even when
the F.LOCK switch on the main unit is turned ON.
3. Be sure to turn the POWER switch OFF when you
plug in or remove the microphone.
Keys 1, 2, and 3 on the microphone are initially assigned
to memory channels 1, 2, and 3, respectively. The
functions of the keys on the transceiver can be set as
follows:
1. Hold down transceiver key 1 (or 2 or 3) and turn the
power on. The programmable function 1 (or 2 or 3)
indicator appears for 10 seconds.
it
PE Y
ON 5 APO
2. When you press a key on the transceiver, the
function of that key is assigned to key 1 (or 2 or 3) on
the SMC-33.
Example: When you press the CALL key, key 1 on the
SMC-33 becomes the CALL key. When you press the F
key, then the CALL key, key 1 becomes the CALL
SCAN key.
The keys that you can set for keys 1, 2, and 3 on the
SMC-33 and their functions are listed on the next page.
PTT
switch
KENWOOD
SMC-33
Earphone jack
LOCK switch
When the LOCK switch is turned ON the MRI, MR2, and
MRS keys on the front of the microphone are disabled.
53