Kenwood TH-77A Instruction Manual page 14

@ Press and hold the key below and turn on the power
switch.
Key Function Refer to
MONI-+ power nee P.9 MONI
oN Select monitoring band. switch
CALL+power | Call keychange tothe Mode | pig caLL
ON key. key
BAND+ power Speaker output band P.8 = SP jack
ON exchange
TONE + power Battery Saver function will P48 4-H
ON turn on or off.
SHIFT+ power Automatic Power Off
ON function will turn on or off. AB ctsle
The 1 key on the remote
1+power ON control microphone (SMC- P.53 SMC-33
33)
The 2 key
2+power ON on the SMC-33 P.53 SMC-33
3-+power ON iesihey P53 SMC-33
on the SMC-33
Key Function Refer to
44+ power ON Hold/resume mode of the VHF P30 4-5-2
band
Hold/resume mode of the
5+power ON UHF band P.30 4-5-2
6+power ON DTMF Delay Time (2 seconds) | P.36 4-6-4
M-+ power ON MEMORY RESET P.23 4-4-2
2 a' P13 ENT/
7+ IN trol lock power0 Tuning control lock function LOCK key
g+power0N Memory recall mode P.26 4-4-6
9+ powerON Exchange TX band P.22 4-3
ENT+ powerON VFO RESET P.23 4-4-2
DUAL + powerON Speaker mode Pea Slate
0+ powerON Beep function on or off PAZ 4-2
MHz+powerON DTSS delay time P.40 4-8-4
SCAN-+ powerON Tone alert sound between P48 4-40
PiPiPi and PulPulPul
14