UTStarcom Gz One Type S User Manual page 65

Confirm Code field. Enter the new four-digit code
again as confirmation.
6. Press Center Select Key
The following message is displayed to confirm the
change has been made : DEVICE CODE SET. If you
make a mistake, CODE DOES NOT MATCH will
appear on the screen.
6.4.5 Emergency #s
Allows you to enter 3 emergency numbers. You can call
these emergency numbers and 911, even when the phone
is locked or restricted.
1. Press Center Select Key
Key right 2 times,
Security.
2. Enter the four-digit lock code and press Center Select
Key for [OK].
NOTE
The default Lock Code is the last 4 digits of your mobile
telephone number.
3. Press Emergency #s.
4. Select emergency number by pressing Navigation Key
up or down .
G'zOne TYPE-S
for [OK].
for [MENU], Navigation
Phone Settings,
126
SETTINGS & TOOLS
5. Select an emergency phone number then press
Center Select Key for [OK].
6.4.6 Erase Contacts
To erase all of your Contacts at once:
1. Press Center Select Key
Key right 2 times,
Security.
2. Enter the four-digit lock code and press Center Select
Key for [OK].
NOTE
The default Lock Code is the last 4 digits of your mobile
telephone number.
3. Press Erase Contacts.
NOTE
There is no confirmation message before all of your Contacts
are erased. As soon as Erase all is selected, they are gone!
6.4.7 Reset Default
To reset your phone to the factory default settings:
1. Press Center Select Key
Key right 2 times,
Security.
G'zOne TYPE-S
for [MENU], Navigation
Phone Settings,
for [MENU], Navigation
Phone Settings,
127