Phone Numbers With Pauses - UTStarcom Gz One Type S User Manual

4. Press and hold to delete the number.
5. Press Center Select Key
A confirmation message appears.
NOTE
If you try to delete the default number, an error message will
appear.
Deleting a Contact Entry
1. Press Right Soft Key
2. Press Navigation Key
Contact entry to be deleted.
3. Press Right Soft Key
4. Press Erase.
5. Press Navigation Key
6. Press Center Select Key
A confirmation message appears.
Deleting a Speed Dial
1. From standby mode, press Center Select Key
[MENU].
2. Press Navigation Key
Speed Dials, then press Center Select Key
[OK].
G'zOne TYPE-S
for [SAVE].
[Contacts].
up or down to highlight the
[Options].
up or down to select Yes.
for [OK].
for
up or down to highlight
for
40
Contacts in Your Phone's Memory
3. Press Navigation Key
Speed Dial number.
4. Press Right Soft Key
5. Press Navigation Key
6. Press Center Select Key
A confirmation message appears.

Phone Numbers With Pauses

Pauses are used for automated systems (i.e., voicemail,
calling cards). Insert a pause after a phone number then
enter another group of numbers. The second set of
numbers is dialed automatically after the pause. This
feature is useful for dialing into systems that require a
code. There are two different types of pauses you can
use when storing a number:
Wait (W)
The phone stops dialing until you press Left Soft Key
[Release] to advance to the next number.
2-Sec Pause
The phone waits 2 seconds before sending the next
string of digits.
G'zOne TYPE-S
up or down to highlight the
[Remove].
up or down to select Yes.
for [OK].
41