Bluetooth Menu; Add New Device - UTStarcom Gz One Type S User Manual

NOTE
When the phone is closed and in idle mode, Stop Watch can
be run by pressing Voice Command key for 2 seconds and
pressing it shortly again. Press the Volume Up key to start
the timer or pause it. Press the Volume Down key to split the
timer. Press the Volume Up key for 2 seconds to reset the
timer. To return to idle mode, press the Voice Command key.

3. Bluetooth Menu

The G'zOne TYPE-S is compatible with devices that
support the Bluetooth ® Headset (HSP), Hands-Free
(HFP), Serial Port (SPP), and Dial-Up Networking (DUN)
Profiles. * You may create and store 20 pairings within
the G'zOne TYPE-S and connect to one device at a time.
The approximate communication range for Bluetooth
wireless technology is up to 25 feet.
NOTE
Read the user guide of each Bluetooth
are trying to pair with your phone because the instructions
may be different.
NOTE
Your phone is based on the Bluetooth
not guaranteed to work with all devices enabled with
®
Bluetooth wireless technology. Phone does not support
®
Bluetooth OBEX Profiles. * For vehicle/accessory (sold
G'zOne TYPE-S
®
®
accessory that you
®
specification, but it is
102
SETTINGS & TOOLS
separately) compatibility go to www.verizonwireless.com/
bluetoothchart.

3.1 Add New Device

Pairing is the process that allows the handset to locate,
establish, and register 1-to-1 connection with the target
device.
Power
Allows you to turn the phone's Bluetooth
1. Press Center Select Key
Key right 2 times, press
2. Press Left Soft Key [On].
NOTE
By default, your phone's Bluetooth
For pairing new Bluetooth
1. Follow the Bluetooth ® accessory instructions to set the
device to pairing mode.
2. Press Center Select Key
Key right 2 times
Center Select Key for [OK] or
New Device.
G'zOne TYPE-S
® power On/Off.
for [MENU],Navigation
Bluetooth Menu.
®
functionality is turned off.
® device
for [MENU],Navigation
Bluetooth Menu. Press
to select Add
103