UTStarcom Gz One Type S User Manual page 35

(Address) and information (Message). These are
dependent upon the type of message you want to send.
Sending a Text Message
1. Press Left Soft Key [Message], press
Message.
2. Press Text Message.
3. Enter the phone number of the recipient or the email
address for an email message.
• Phone number.
• E-mail address for an email message.
4. Press Center Select Key
5. Type your message (text or email).
6. Press Center Select Key
A sending screen is displayed.
NOTE
If you send a Text message to a phone without Text
capabilities, you will still be notified that the message was
sent, however the message will not be received.
Sending a Pictures Message
1. Press Left Soft Key [Message], press
Message.
G'zOne TYPE-S
New
for [OK].
for [SEND].
New
66
2. Press Picture Message.
3. Enter the phone number of the recipient or the email
address for an email message.
• Phone number.
• E-mail address for an email message.
4. Press Center Select Key
5. Type your message (text or email).
6. Press Navigation Key
Picture and press Left Soft Key
7. Press Navigation Key
Center Select Key for [OK].
8. Press Navigation Key
Sound and press Left Soft Key
9. Press Navigation Key
sound and press Center Select Key
10. Press Navigation Key
the Subject and enter the subject.
11. Press Center Select Key
A sending screen is displayed.
Sending a Video Message
[Message] ,
1. Press Left Soft Key
G'zOne TYPE-S
MESSAGING
for [OK].
up or down to highlight
[Pictures].
to select picture and press
up or down to highlight
[Sounds].
up or down to select the
for [OK].
up or down to highlight
for [SEND].
press New
67